基于准三维冰形算法的结冰预测技术及应用研究

机翼结冰是威胁民用飞机飞行安全的主要因素之一,准确预测机翼的结冰过程和特点,可为防除冰设计提供依据和支撑。提出了利用二维模拟三维的准三维冰形算法,该算法在保证结冰预测精度的同时,极大地降低了型号结冰计算成本;给出了顺气流和垂直于前缘两种典型民用飞机后掠翼机翼的二维剖面截取方法,并将采用该方法的计算结果与三维后掠机翼的结冰预测结果进行了对比分析。结果表明,相对于顺气流方式,垂直于前缘方式的准三维冰形算法与三维后掠机翼的结果更为接近。     

基于民航团队旅客销售的组合预测方法分析

利用Matlab分别用回归分析算法、BP神经网络算法、最小二乘支持向量机算法和组合预测算法对民航团队销售数据进行预测和比较分析,期望为民航销售人员提供更加精准的预测信息,以获得更高的航线收益.结果显示神经网络、支持向量机和组合预测3种算法比航空公司常用的回归分析预测精准度有了明显的提高.支持向量机预测精度相对神经网络稍低,却拥有更强的泛化能力.组合预测能避免单一预测方法的误差,更加适合航线销售人员的实际操作.     

基于NFTET的高超声速飞行器鲁棒轨迹重构设计

考虑高超声速飞行器故障下安全再入飞行问题，针对飞行器发生较大故障的情况，提出了基于相邻可行轨迹存在定理(Neighboring feasible trajectory existence theorem,NFTET)的鲁棒在线轨迹重构算法。在标称情况下基于反馈线性化预测校正制导算法生成满足各种约束条件的再入轨迹；由于NFTET只适用于发生较小故障的情况，为保证较大故障下飞行器仍能以较高精度安全着陆，基于NFTET理论设计了鲁棒轨迹重构算法，得到了较高落点精度的飞行轨迹。仿真结果表明，本文所提出算法能有效解决飞行器较大故障下的安全再入轨迹重构问题，提高了飞行器的自主容错能力。     

基于遗传算法的军事物流运输计划

针对军事物流运输中车辆装载和车辆路径的组合问题进行研究,建立车辆装载和车辆路径组合问题的目标优化模型。通过改进遗传算法对模型求解,得到了较为满意的结果,可以在满足多车型多品种货物配送约束的条件下,实现运输车辆最少、车辆满载率高、车辆运输路径最短的目标。     

Multi-state autonomous drilling for lunar exploration

Due to the lack of information of subsurface lunar regolith stratification which varies along depth, the drilling device may encounter lunar soil and lunar rock randomly in the drilling process. To meet the load safety requirements of unmanned sampling mission under limited orbital resources, the control strategy of autonomous drilling should adapt to the indeterminable lunar environments. Based on the analysis of two types of typical drilling media (i.e., lunar soil and lunar rock), this paper proposes a multi-state control strategy for autonomous lunar drilling. To represent the working circumstances in the lunar subsurface and reduce the complexity of the control algo-rithm, lunar drilling process was categorized into three drilling states:the interface detection, initi-ation of drilling parameters for recognition and drilling medium recognition. Support vector machine (SVM) and continuous wavelet transform were employed for the online recognition of dril-ling media and interface, respectively. Finite state machine was utilized to control the transition among different drilling states. To verify the effectiveness of the multi-state control strategy, drilling experiments were implemented with multi-layered drilling media constructed by lunar soil simulant and lunar rock simulant. The results reveal that the multi-state control method is capable of detect-ing drilling state variation and adjusting drilling parameters timely under vibration interferences. The multi-state control method provides a feasible reference for the control of extraterrestrial autonomous drilling.     

一种高灵敏度的电动舵机系统研究

本文研究了一种基于单片机的高灵敏、分体式小型电动舵机系统。首先分析了电动舵机的组成与功能，并分别从舵机结构、控制算法两方面对舵机系统的性能设计进行了分析和阐述。针对舵机高灵敏度的性能要求，对控制算法进行了优化并进行了相应仿真。最后经过试验验证，电动舵机满足了高灵敏度的指标要求，验证了控制算法的正确性。     

考虑结构因素的起落架摆振稳定性分析及优化

以考虑侧向柔性和陀螺特性的摆振数学模型为例,研究了起落架摆振结构因素的影响.采用代数稳定性判据、状态空间法等方法进行了稳定性分析,得到了有关侧向刚度、偏摆刚度和稳定距等结构因素的稳定性区域,以及幅相特性曲线.而且对于起落架摆振优化,提出了基于遗传算法的PID主动控制策略.仿真结果表明,方法有效抑制了各种结构参数组合下摆振的发生,使得受控系统具有一定的强鲁棒性.     

粒子群算法在装配序列规划中的应用方法研究

将粒子群优化算法引入到装配序列规划中,详细讨论了粒子群算法在装配规划中的数学表示,给出了适应度函数评价方法,并实现了装配干涉矩阵的构建,以发动机化油器装配为例,分析了粒子群算法在装配序列规划中的具体应用.     

DME Interference mitigation for L-DACS1 based on system identification and sparse representation

L-band digital aeronautical communication system 1 (L-DACS1) is a promising candi-date data-link for future air-ground communication, but it is severely interfered by the pulse pairs (PPs) generated by distance measure equipment. A novel PP mitigation approach is proposed in this paper. Firstly, a deformed PP detection (DPPD) method that combines a filter bank, correlation detection, and rescanning is proposed to detect the deformed PPs (DPPs) which are caused by mul-tiple filters in the receiver. Secondly, a finite impulse response (FIR) model is used to approximate the overall characteristic of filters, and then the waveform of DPP can be acquired by the original waveform of PP and the FIR model. Finally, sparse representation is used to estimate the position and amplitude of each DPP, and then reconstruct each DPP. The reconstructed DPPs will be sub-tracted from the contaminated signal to mitigate interference. Numerical experiments show that the bit error rate performance of our approach is about 5 dB better than that of recent works and is closer to interference-free environment.     

Plastic wrinkling prediction in thin-walled part forming process:A review

The precision forming of thin-walled components has been urgently needed in aviation and aerospace field. However, the wrinkling induced by the compressive instability is one of the major defects in thin-walled part forming. The initiation and growth of the wrinkles are interac-tively affected by many factors such as stress states, mechanical properties of the material, geometry of the workpiece and boundary conditions. Especially when the forming process involves compli-cated boundary conditions such as multi-dies constrains, the perturbation of clearances between workpiece and dies and the contact conditions changing in time and space, etc., the predication of the wrinkling is further complicated. In this paper, the current prediction methods were summa-rized including the static equilibrium method, the energy method, the initial imperfection method, the eigenvalue buckling analysis method, the static-implicit finite element method and the dynamic-explicit finite element method. Then, a systematical comparison and summary of these methods in terms of their advantages and limitations are presented. By using a combination of explicit FE method, initial imperfection and energy conservation, a hybrid method is recommended to predict plastic wrinkling in thin-walled part forming. Finally, considering the urgent requirements of com-plex thin-walled structures’ part in aviation and aerospace field, the trends and challenges in wrin-kling prediction under complicated boundary conditions are presented.